sky96111
V2EX  ›  问与答

Manjaro 开机系统无响应

By sky96111 at 2018 年 8 月 6 日 · 2262 次点击
固态上装了三个系统,windiws、androidx86 和 manjaro,最近更新了 rEFInd,出现了 bug,调试 rEFInd 重启有点频繁。
今天发现 bios 自检时间超级长,而且进入 manjaro 发现系统会直接卡住 1 分钟左右,electron-ssr 随系统自启后节点更新成功的通知一直停留在桌面上,应该是完全无响应状态,鼠标出现在右下角处无法移动和点击,快捷键也没法使用。

日志太长,我就发疑似造成错误的发出来
[ 6.786732] usb 1-2: device descriptor read/64, error -110

[ 7.840718] rfkill: input handler disabled

[ 22.360470] usb 1-2: device descriptor read/64, error -110

[ 22.590421] usb 1-2: new high-speed USB device number 3 using xhci_hcd

[ 27.907147] usb 1-2: device descriptor read/64, error -110

[ 43.480455] usb 1-2: device descriptor read/64, error -110

[ 43.587097] usb usb1-port2: attempt power cycle

[ 44.230411] usb 1-2: new high-speed USB device number 4 using xhci_hcd

[ 49.330584] usb 1-2: device descriptor read/8, error -110

[ 54.663925] usb 1-2: device descriptor read/8, error -110

[ 54.893744] usb 1-2: new high-speed USB device number 5 using xhci_hcd

[ 59.997252] usb 1-2: device descriptor read/8, error -110

[ 65.330588] usb 1-2: device descriptor read/8, error -110

[ 65.437094] usb usb1-port2: unable to enumerate USB device

[ 65.560409] usb 1-7: new full-speed USB device number 6 using xhci_hcd

[ 66.003741] usb 1-10: new low-speed USB device number 7 using xhci_hcd

出现这个问题前没有进行滚动更新,请问可能是什么原因造成的?谢谢
1 条回复  •  2018-08-06 18:17:17 +08:00
sky96111
   1
sky96111  
OP
   2018 年 8 月 6 日 via Android
重新插拔鼠标 USB 线竟然好了。。滚动更新中…真香
© 2026 V2EX · 27ms · 3.9.8.5